Expertronic Technical Solutions inc © 2012.
E-
Important Tips
Keep units clean and dry.
Never plug or unplug heads while pack is charged up .
Always wait for "ready" light to be ON before switching isolate/combine or A + B switches.
Keep reflectors clean using cloth dampened with Windex to get maximum light output
Avoid touching flashtubes and model lamps with bare fingers ; grease will leave a black mark ; clean with Methyl alcohol and let dry before using.
Check that the ground pin of the three prong plug is still there for your safety.
If equipment makes unusual noises such as crackling and sparking sounds, it surely needs to be opened , inspected, and likely serviced.
In winter, watch out for condensation as a result of going from the outside to hot buildings; Allow units to warm up to room temperature before plugging them in.
When storing power packs , Remove from storage monthly,apply power for 10-
Never leave studio lighting equipment unattended ,as model lamps get hot enough to start fires; if you go out for lunch , or at the end of the day, Turn everything OFF.
When shipping equipment for repair, make sure box is large enough to have at least
4" packing material on all sides of unit, and don't forget to re-